Snow Cannon Foam Blaster — Thick Pre-Wash Foam, No Pressure Washer Needed

Blanket your car in thick, clinging snow foam — with nothing but a garden hose.

Most swirl marks and fine scratches don't come from the road. They come from wash day: grinding grit into your paint with a sponge. A proper pre-wash lifts that grit off before anything touches the panel — but foam cannons normally need a pressure washer. This one doesn't.

How it works

The Snow Cannon's 2L pressurised tank and foam-mesh nozzle whip your shampoo into dense, shaving-cream foam. It clings to the panel, soaks into the dirt and pulls it away from the paint, so your contact wash is safer and faster.

• No pressure washer required — connects straight to a standard garden hose
• Thick, clinging foam that dwells on vertical panels instead of running off
• Adjustable spray pattern for panels, wheels and tight spots
• 2L tank does a full 4WD in one fill
• Cuts wash-induced swirls dramatically — your paint will thank you

How to use

1. Add 30–50 ml of Wash + Wax Shampoo, fill with water and connect your hose.
2. Foam the whole car and let it dwell 3–5 minutes (keep it out of direct sun).
3. Rinse, then do a light contact wash with a mitt. Done.

Specs

• Tank: 2 L · fits standard AU garden hose fittings
• Adjustable foam concentration dial
• Includes: cannon, hose connectors, nozzle set

Renter? No driveway power point? Doesn't matter — if you've got a tap, you've got a foam party.